Product Description
Specification:
| MODEL | 3VHS |
| Table | |
| Table size | 300 × 1200mm |
| Table Load Capacity | 300kg |
| Number of T-Slots | 3 |
| T-Slots Width | 16mm |
| T-Slot Center Distance | 65mm |
| Table Ways (X Axis) | Dovetail |
| Bed Ways (Y Axis) | Dovetail |
| Column Ways (Z Axis) | Dovetail |
| Travels | |
| Longitudinal travel (X Axis) –Manual | 700mm |
| Longitudinal (X Axis) –Auto (opt.) | 700mm |
| Cross travel (Y Axis) –Manual | 300mm |
| Vertical travel (Z Axis) – Manual | 330mm |
| Table longitudinal feed motor | 1 – 1/2 Hp |
| Range of longitudinal feed speed | 60HZ (21~246)mm/min (6 steps)50HZ (17~203)mm/min (6 steps) |
| Range of longitudinal rapid speed | 60HZ (2056) / 50HZ (1173)mm/min |
| Table vertical rapid motor | – |
| Range of vertical rapid speed | – |
| Table swivel (R&L) | 45° |
| Vertical Turret Spindle | |
| Spindle motor | 5Hp |
| Amp. Draw 380V | 60HZ: 4.92, 50HZ: 8.27 |
| Amp. Draw 230V | 60HZ: 13.3, 50HZ: 13.6 |
| Amp. Draw 460V | 60HZ: 6.69, 50HZ: 6.83 |
| Spindle speed (rpm) 50HZ | 58-3165RPM vari-speed |
| Spindle speed (rpm) 60HZ | 70-3800RPM vari-speed |
| Low range (rpm) 50HZ | 58-383RPM |
| Low range (rpm) 60HZ | 70-460RPM |
| High range (rpm) 50HZ | 500-3165RPM |
| High range (rpm) 60HZ | 600-3800RPM |
| Spindle Taper | NT40 |
| Head swivel (R&L) | 90° |
| Overarm travel | 455mm |
| Distance of spindle end to table top | 155-475mm |
| Quill Feed in/revolution | 3.5-19.7mm0.0015 / 0.0031 / 0.006 |
| Quill Feed mm/revolution | 0.04 / 0.08 / 0.15mm |
| Quill travel | 140mm (5.5”) |
| Quill Dia. | 105mm (4.13”) |
| Horizontal Spindle | |
| Spindle motor | 4Hp |
| Amp. Draw 380V | 60HZ: 6.94 , 50HZ: 7.12 |
| Amp. Draw 230V | 60HZ: 11.4 , 50HZ: 11.7 |
| Amp. Draw 460V | 60HZ: 5.73 , 50HZ: 5.882 |
| Spindle speed (rpm) 50HZ | 90 – 1225RPM , 6 steps |
| Spindle speed (rpm) 60HZ | 108 – 1470RPM , 6 steps |
| Low range (rpm) 50HZ | 90-358RPM |
| Low range (rpm) 60HZ | 108-430RPM |
| High range (rpm) 50HZ | 300-1225RPM |
| High range (rpm) 60HZ | 360-1470RPM |
| Spindle Taper | NT40 |
| Spindle center to table | 0-330mm |
| Spindle center to overarm bottom | 135mm |
| Construction & Weight | |
| Over Height | 2020mm |
| Over Depth | 1200mm |
| Over Width | 1800mm (one side) |
| Halogen Work Light | 24V / 70W |
| Coolant pump | 1/8Hp |
| Packing size | 1575 × 1375 × 2507mm |
| Machine New Weight | 1250kg |
| Machine Gross Weight | 1380kg |
Reviews
There are no reviews yet.