Product Description
Specification:
| CONTROL | Fanuc Oi-TC |
| MACHINE CAPACITY | |
| Maximum Swing | 1400mm |
| Swing over Cross Slide | 973mm |
| Maximum Machining Length | 1981mm |
| Travel X Axis | 479mm |
| Travel Z Axis | 1981mmm |
| Rapid X and Z Axis | 7976mm/min |
| Maximum Feed Rate X and Z Axis | 4978mm/min |
| SPINDLE | |
| Spindle Nose | ISO A2-15 |
| Spindle Bore Diameter | 229mm |
| Spindle Gearbox | 4 Range Gearbox |
| Maximum Spindle Speed | 450RPM |
| Spindle Motor Output | 50/60Hp |
| Spindle Bearings for 9° Bore | Timken LM451349/LM451310Hp |
| 4 POSITION SQUARE TURRET | |
| Square Tool Shank | 32 x 32mm |
| Boring Bar Maximum Diameter | 64mm |
| 8 POSITION SQUARE TURRET | |
| Square Tool Shank | 32 x 32mm |
| Boring Bar Maximum Diameter | 64mm |
| TAILSTOCK | |
| Tailstock Movement Type | Manual |
| Quill Stroke | 150mm |
| Quill Diameter | 119mm |
| Quill Inside Taper | 6# Morse Taper |
| Boring Type Quill | (Optional) |
| MACHINE MISCELLANEOUS | |
| Bed Width | 660mm |
| Cross Slide Width | 348mm |
| Z Axis: Bed Ways are Box and Vee for (Better Accuracy | (3 Vee Guide way) 2 for Carriage, 1 for Tailstock |
| X Axis Cr oss Slide: Box Ways for Higher Rigidity (not dovetail) | 8 Seconds |
| Servo Motor X Axis | Fanuc alpha 12/2000i |
| Servo Motor Z Axis | Fanuc alpha 22/2000i |
| Thrust X Axis | 1218/ 2346kg of Thrust |
| Thrust Z Axis | 1340/ 2680kg of Thrust |
| Ball Screw X Axis | 40mm Diameter x 6mm Pitch |
| Ball Screw Z Axis | 63mm Diameter x 10mm Pitch |
| Ball Screw Thrust Bearings X Axis | Fanuc alpha 12/2000i |
| Ball Screw Thrust Bearings Z Axis | NSK 45TAC100AD13DPN7 |
| Cabinet Heat Exchanger | Kakung EA-5AR ISO |
| Main Hydraulic Unit | Yuken (Japan) |
| Solenoid Valves | Yuken (Japan) |
| Coolant Pump | 1Hp (Taiwan) |
| Air Requirement | 90 P.S.I |
| Electric Requirement | 40KVA |
| Machine Dimensions (L x W xH) | 5435 x 2692 x 2362mm |
| Machine Net Weight (Approx) | 9117kg |
Reviews
There are no reviews yet.