Product Description
Specification:
TABLE | ||
Table Size | Ø320mm | |
T-Slots (Size x Number) | 12H7 x 4 | |
Max. Workpiece Weight | 150kg | |
TRAVEL | ||
X axis / Y axis / Z axis | 600mm / 550mm / 500mm | |
Table Top Surface to Spindle Nose | 50 ~ 550mm | |
Slideway Type ( X, Y & Z axis ) | Linear Guideway | |
FEED | ||
Rapid Traverse Rate X axis | 40m / min | |
Y axis | 40m / min | |
Z axis | 30m / min | |
Cutting Feed Rate | 18000mm / min | |
Minimum Input Increment | 0.001mm | |
SPINDLE | ||
Driving System | Direct Drive | |
Spindle Motor (30 min.rating / continuous rating) | 7.5kW (10HP) / 5.5kW (7.5HP) | |
Type of Tool Shank | N.T.40 | |
Spindle Speed | 10000RPM | |
Spindle Bearing Bore Diameter | Ø70mm | |
Spindle Max. Torque | 47N-m | |
Cooling / Lubrication | Oil / Grease | |
A.T.C | ||
Tool Magazine Capacity | 24 T | |
Tool Holder | BT40 | |
Pull Stud | 45° | |
Max. Tool Weight | 7kg | |
Max. Tool Length | 265mm | |
Max. Tool Dia. | Ø95mm | |
Max. Tool Dia. (adjacent pockets empty) | Ø185mm | |
Tool Selection | Random | |
MOTORS | ||
X Axis Drive Motors | 4kW (5.3HP) | |
Y Axis Drive Motors | 4kW (5.3HP) | |
Z Axis Drive Motors | 4kW (5.3HP) | |
4th / 5th Axis | ||
Max. Work Piece Size | Ø320 x 280mm | |
Torque | 25kg-m | |
Direction | Rotating Axis | Tilting Axis |
Brake Type | Drum Type | Double Drum Type |
Angles | 360° | +30° ~ -120° |
Maximum Speed | 25 rpm | 25 rpm |
OTHER | ||
Power | 36 KVA | |
Pneumatic Pressure | 6kg / cm² | |
Coolant Pump | 3 / 4HP | |
Coolant Tank Capacity | 280L | |
Net Weight | 7000kgf | |
STANDARD | OPTIONS | |
Heat Exchanger | Screw type chip conveyor with chip bins | |
Removable Manual Pulse Generator | Flat type chip conveyor and chip bin | |
Enclosed Splash | Coolant through spindle with filter | |
RS-232 Interface | Bed coolant wash | |
Embedded Ethernet | Automatic tool length measuring device | |
Automatic Power Off | Automatic workpiece measuring device | |
Call Light | Linear scale | |
Automatic Lubrication Equipment | 30, 32, 40 tools cam type ATC | |
Work Light | 12,000 rpm / 15,000 rpm direct direct spindle with 15 HP | |
Tool Kit | 15,000 rpm direct drice spindle with 25 HP | |
SpareFuses | 15,000 rpm built-in spindle with 20 HP | |
Swing Type Operator Panel | Hollow ballscrew with cooling system | |
Spindle Oil Cooler | 5 axes simultaneous function | |
24 Tools Cam Type ATC | ||
Rigid Tapping | ||
Chip Augers on Base | ||
5 Axis Control / 4 Axis Simultaneous Function |
Reviews
There are no reviews yet.