Product Description
Specification:
| GT-2280 | GT-22100 | |
| Table Clamping Surface (L x W) | 609 x 2133mm | 609 x 2642mm |
| Maximum Cross Travel | 711 | 711 |
| Maximum Grinding Area (L x W) | 609 x 2032mm | 609 x 2540mm |
| Maximum Distance between Spindle Centre to Table | 800-1000mm | 800-1000mm |
| Down Feed per Division | 0.002/0.01/0.02mm | 0.002/0.01/0.02mm |
| Down Feed per Revolution | 0.25/1.2/2.5mm | 0.25/1.2/2.5mm |
| Auto Downfeed Servo Motor | 0.01-0.05mm | 0.01-0.05mm |
| Longitudinal Table Speed | 254-2667mm/min | 254-2667mm/min |
| Cross Feed Intermittent | 0.10-40mm | 0.10-40mm |
| Cross Feed Continuous | 23-127mm | 23-127mm |
| Cross Feed per Division | 0.002/0.02/0.1mm | 0.002/0.02/0.1mm |
| Grinding Wheel Diameter (OD x ID x W) | 508 x 127 x 51mm | 508 x 127 x 51mm |
| Spindle Speeds (50/60Hz) | 1450/1720RPM | 1450/1720RPM |
| Spindle Motor | 15/25Hp | 15/25Hp |
| Hydraulic Pump Motor | 7.5Hp | 7.5Hp |
| Total Power Motor | 24/34Hp | 24/34Hp |
| Floor Space (L x W x H) | 6350 x 2972 x 2458mm | 7341 x 2972 x 2458mm |
| Machine Net Weight (Approx) | 8581kg | 9979kg |
| Chuck Weight | 539kg | 675kg |
| Maximum Workpiece on Chuck | 1796kg | 1796kg |
Reviews
There are no reviews yet.