Product Description
Specification:
- Heavy-Rigidity Linear Guide ways are applied on X and Z Axes to increase Cutting Capacity
- 45 degree Slant Bed Design provides good Chip Disposal
- Ergonomic Design enables the operator to operate the Machine comfortably to Increase Efficiency
| Model | SJ-20 |
| Swing over Bed | 480mm |
| Swing over Cross Slide | 222mm |
| Maximum Turning Diameter | 250mm |
| Maximum Work Length | 330mm |
| Draw Tube Diameter | 45mm |
| Chuck Size | 152mm |
| Spindle Drive Motor | 5.5/7.5kW |
| Spindle Speed Range | 6000RPM |
| Spindle Nose | A2-5 |
| Through Spindle Hole Diameter | 51mm |
| Front Bearing Diameter | 80mm |
| Inside Spindle Taper | MT#6 |
| X Axis Travel | 130mm |
| Z Axis Travel | 350mm |
| X Axis Motor | 1.4kW |
| Z Axis Motor | 2.8kW |
| X Axis Rapid Traverse | 24m/min |
| Z Axis Rapid Traverse | 24m/min |
| No. of Tool Stations | 12 |
| Boring Bar Diameter | 32mm |
| Quill Diameter | 58mm |
| Quill Travel | 88mm |
| Quill Taper | MT#4 |
| Electrical Power Supply | 32kVA |
| Coolant Tank Capacity | 125Litres |
| Floor Space (L x W) | 1800 x 1450mm |
| Approx Net Weight | 3000kg |
Reviews
There are no reviews yet.