Product Description
Specification:
- GE Fanuc OiTC Control with optional Manual Guide i with 10.4” colour TFT Flat Screen
- Swing up to: 400mm (585mm in gap)
- Centre Distance up to: 1250mm
- Gamet High Precision Spindle Bearings
- 3 automatic Headstock Gear Ranges
- Automatic 8-station Bi-Directional Indexing Disk Turret
- CE regulated Electrically Interlocked and Fully Enclosed Machine Guarding
- Electric Coolant System
- 3-jaw Pratt Burnerd Scroll Chuck (250mm)
- Colchester-Harrison’s Own COLCAM Programming Package
| Centre Height | 195mm |
| Distance between Centres | 1250mm |
| Swing over Bed | 400mm |
| Swing in Gap | 585mm |
| Swing over Cross Slide | 246mm |
| Gap Width in Front of Faceplate | 165mm |
| Spindle Centre Height from Floor | 1080mm |
| Width of Cross Slide | 178mm |
| Bed Width | 320mm |
| Depth of Bed Width | 380mm |
| Type of Bedways | V and Flat Ways |
| Coolant Tank Capacity | 75Litres |
| Spindle Nose | D1-6 Camlock |
| Spindle Bore | 55mm |
| Spindle Front Bearing I.D | 94mm |
| Spindle Taper | No.4 MT |
| Number of Spindle Speeds | 3 |
| Spindle Speeds | 1-2700RPM |
| Spindle Drive | Variable AC |
| Spindle Motor | 5/7.5kW |
| Minimum Spindle Speed for Full Power | 69RPM |
| Power Consumption | 22kVA |
| Cross Slide Travel X Axis | 245mm |
| X Axis Rapid Traverse | 8m/min |
| X and Z Axis Feed Rate | .03-60mm/rev |
| X Axis Thrust Continuous | 415kg |
| X Axis Ballscrew | 20 x 4mm |
| Saddle Travel (Z axis) | 1156mm |
| Z Axis Rapid Traverse | 10m/min |
| Z Axis Thrust Continuous | 936kg |
| Z Axis Ballscrew | 32 x 6mm |
| Positioning Accuracy | .005°mm |
| Repeatability | .0025mm |
| Tailstock Taper | No. 5MT |
| Tailstock Quill Diameter | 73mm |
| Machine Dimensions (L x W x H) | 2900 x 1700 x 1500mm |
Reviews
There are no reviews yet.